Swingarm bearings

Started by fanctil , Mar 28 2012 10:55 AM

No replies to this topic

  • fanctil

Posted 28 March 2012 - 10:55 AM

#1

Did anyone tried to replace their swingarm bearings on DR-Z125 03 using AllBalls bearings kit?
I did! But after putting the bearings in place, I noticed that the bearing shafts (spacers) where not the good one in the AllBalls kit!!!
The dealer where I bought the kit from ordered an other kit, in case that it was a packaging mistake, but the second one was similar, with wrong spacers...
The dealer suggested me to exchange the AllBalls kit for a PivotWorks kit for 30$ difference. I guess it's the better option I have, but I have to get off the Allsballs seals and bearing from my swingarm :thumbsup:

I advised AllBalls of that problem, but no answer from them! :thumbsup:

So, if you have to change your swingarm bearings, save yourself time and buy a PivotWorks kit.
Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
Back to DR-Z 125/125L/250


  1. ThumperTalk
  2. Dirt Bike
  3. Make / Model Specific
  4. Suzuki
  5. DR-Z 125/125L/250
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.
Register Close

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!