Protapers on 11 wr450


5 replies to this topic
  • 11WR450

Posted March 26, 2012 - 05:42 PM

#1

What type of pro tapers come on the 11 wrs from factory...Im thinking I need a taller rise, im 6'1" and when standing I think a taller bar might fit me better. thanks

  • dustdogg

Posted March 26, 2012 - 06:13 PM

#2

So far my favorite ProTaper bend is the Factory Suzuki/KTM stock. If you look at the chart http://www.protaper....dlebars/contour
you will see that it is a fairly tall bar and it is very straight with very little sweep. I'm only about 5'9" so this may still not be enough. You might also look at the Windham, CR high and the Pastrana FMX if you need to go higher.

  • 11WR450

Posted March 26, 2012 - 07:46 PM

#3

Thanks,
that helped a lot.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • OUTERLIMITS

Posted March 28, 2012 - 11:54 AM

#4

Pastrana FMX bend is awesome, nice and tall. I'm 6' and added risers as well and it was great for stand up riding........well before I bent them anyway.

  • Taxgod4u

Posted March 28, 2012 - 12:41 PM

#5

which bend is stock?

  • dustdogg

Posted March 28, 2012 - 02:43 PM

#6

which bend is stock?


It looks like it is the EVO-YZ High. I found all the OEM specs at ProTapers tech section.
http://www.protaper....gearing-charts/




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.