Quick Ring Question


2 replies to this topic
  • KJK_JR

Posted March 10, 2012 - 09:54 AM

#1

Which is top and second ring? Is the copper one with the "N" the top ring and the black thicker one without writting the second one?
Posted Image

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted March 10, 2012 - 11:03 AM

#2

The key is the word "thicker". That one will only fit in one place. When pushed into the ring groove as deep as they will go, both rings should look the same as far as how near flush with the piston they are. In '09 and earlier models you can usually only put the second ring in the second groove anyway, because it's too tall to fit in the top groove.

If they were both identical in size and profile, it would typically be the copper colored or gray edged ring in the top, and the black edged ring in groove 2.

  • KJK_JR

Posted March 10, 2012 - 11:06 AM

#3

Thankyou! That makes sense once you go to put the rings on the piston.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.