xr650r jetting



2 replies to this topic
  • mzanden

Posted October 11, 2003 - 08:34 AM

#1

What pilot jet size has been effective in eliminating hanging idles with a stag 1 cams?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • irondude

Posted October 11, 2003 - 09:41 AM

#2

Edelbrock is the only way to fix the thing.
Otherwise try 68s pilot. Hot set up seems to be with 175 main and clip in third. Even with cut out airbox/side plate--works good. No popping, reasonable starting, reasonablele off-idle hit. Some say hanging idle is more a vacuum issue than anything....Check the archives-there's lots on this subject...yahoo group go off on it as well...
-Mike

  • mzanden

Posted October 11, 2003 - 02:44 PM

#3

what, a vacuum leak?
I would love to put on an Edelbrock right now but it is not in the bugget.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.