smoker SM build
Started by
lumpy790
, Mar 03 2012 07:18 AM
21 replies to this topic
Posted 03 March 2012 - 07:18 AM
been collecting the parts for about a year...... pieces are coming together and did some work on the build tonight.....
Posted 03 March 2012 - 08:42 AM
01 YZ250 .... that I already had a street title for.
Edited by lumpy790, 03 March 2012 - 08:44 AM.
Posted 05 March 2012 - 06:45 AM
made major progress in assembling the bike but after installing the new stator with charging circuit ..... there is no spark 
Posted 03 April 2012 - 12:24 PM
nice work, im building a smoker myself as well. What kind of tires are those? I searched high and low for a set like that but couldnt find a rear in the 150/60.
Posted 04 April 2012 - 05:29 AM
tires are road race rain tires.
ebay seller sent a replacement and it is a wrong model..... think I am jusy going to get a electrosport stator and be done with it.
ebay seller sent a replacement and it is a wrong model..... think I am jusy going to get a electrosport stator and be done with it.
Posted 06 April 2012 - 05:19 PM
this one is a Bridgestone the last one was a Pirelli. I buy them used from the road racers.....they get harder from heat cycles and that makes them last longer on the street.
They work ok on a 2 stroke but a 4 stroke will wear them out fast
They work ok on a 2 stroke but a 4 stroke will wear them out fast
Posted 21 April 2012 - 06:00 PM
Quote
i didnt know anywhere in the US allowed you to title a 2 stroke
Yup... KTMs still slip through the loophole as well as a smokers that were previously street titled
Edited by Pcar928, 21 April 2012 - 06:00 PM.
Posted 27 April 2012 - 04:29 PM
GaDRZ400sMan, on 06 April 2012 - 07:40 AM, said:
i didnt know anywhere in the US allowed you to title a 2 stroke
Depends on what state you live in. It can be a major pain and very costly in some states, while in others you can put your screaming banshee on the road haha.
Posted 15 May 2012 - 08:51 AM
agreed.... l would have liked it is the bracket moved the matting suface a little further outward away from the chain. I will be turning the bolt around so its a little narrower.
Posted 15 May 2012 - 09:43 AM
Nice build lumpy, my drz supermoto rims fit on my plated 00 yz300, I was wondering what sprocket combo your running? Currently have a 41t bolted on the rear.
Edited by FIVEWIDE, 15 May 2012 - 09:46 AM.
Posted 16 May 2012 - 06:12 AM
when I raced Supermoto with it I ran a 40 rear and -1 on the front to get the pull out of turns and stay with the 450's. For street I am going to try a 40 rear and stock front.
Edited by lumpy790, 16 May 2012 - 06:16 AM.
