Hot Start Cable Re-routing

2 replies to this topic
  • Mark537

Posted February 28, 2012 - 05:12 PM


I just got my moose-ex pull clutch lever and installed it and the lever works great. I am however do not like that the hot start is on the bottom. The cable does not come into the perch straight because of my bar pad. Does anyone have any suggestions on how to position the cable to fit better?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Moscow Roost

Posted March 01, 2012 - 03:49 PM


While it may not come in perfectly straight, if the lever isn't binding when pushed in or going back to rest (should have a little play AFTER you move the handlebars back and forth after pushing it in) then it doesn't matter. If that doesn't work, you can always purchase a hot start lever for the brake side.

  • Mark537

Posted March 01, 2012 - 08:06 PM


That is a good idea about putting the hot start on the brake side.Thanks I was at my dads and worked on my bike today and got it to fit.

Related Content


Megabomb Fitment by 288yz450

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply

BIGBORE FOR YZ450F 2006? by Taattie94

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

Yamaha YZ450F 2017 by Chris.GVS

Yamaha YZ450F 2017
  • * * * * *
  • 1 review
  • Last review by Tommyk_55
  • On January 15, 2017

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

Wilson the Blue Privateer by jetfuel

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.