correct needle jet spec for YZ400F

No replies to this topic
  • Tom_Krause

Posted August 13, 2001 - 01:17 PM


My manual first says 1 3/8 turns out and then later says 1 3/4 turns out. Anybody know which is right. Will it make much difference?

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.