Help me pick a WR450F and ADV it!

[n16ht5]

Pro Moto Billet Rack and Wolfman PMB bag

MSR Expedition

Now I need buddy pegs. HM450 wants $150.. Baja Designs $135.

Going to try to fab up some myself.

Really liking the modded 09 yzf exhaust. Great power sound and looks.

If anyone wants the PMBspark arestor I will sell it

Also put a new Primary Drive O-ring chain on. 116T vs 114.. Tire is further back now for snow chain To clear the swingarm. Also helps if I break a chain it will be long enough to just add a new master link. Broke a chain once and when I tried to put a master link on it was too short because I had tocut off the bad links. $50 at Rockymountain.. Best deal.. Thanks

Edited June 30, 2012 by n16ht5

[n16ht5]

n16ht5,

What are the tire plugging tools for?

I run Tubliss.

[jmesserer]

air compressor

Dunlop MX51 90/100 front and Michelin Trial X Light for rear... awesome summer rock tires

I really like how you mounted this pack here, can you tell me how you went about it. Is that a special pack, where would I get one?

Thanks,

Jeremiah

[Fruitfarmer231]

Pro Moto Billet Rack and Wolfman PMB bag

MSR Expedition

Now I need buddy pegs. HM450 wants $150.. Baja Designs $135.

Going to try to fab up some myself.

Really liking the modded 09 yzf exhaust. Great power sound and looks.

If anyone wants the PMBspark arestor I will sell it

Also put a new Primary Drive O-ring chain on. 116T vs 114.. Tire is further back now for snow chain To clear the swingarm. Also helps if I break a chain it will be long enough to just add a new master link. Broke a chain once and when I tried to put a master link on it was too short because I had tocut off the bad links. $50 at Rockymountain.. Best deal.. Thanks

Pro Moto Billet Rack and Wolfman PMB bag

MSR Expedition

Now I need buddy pegs. HM450 wants $150.. Baja Designs $135.

Going to try to fab up some myself.

Really liking the modded 09 yzf exhaust. Great power sound and looks.

If anyone wants the PMBspark arestor I will sell it

Also put a new Primary Drive O-ring chain on. 116T vs 114.. Tire is further back now for snow chain To clear the swingarm. Also helps if I break a chain it will be long enough to just add a new master link. Broke a chain once and when I tried to put a master link on it was too short because I had tocut off the bad links. $50 at Rockymountain.. Best deal.. Thanks

Nice looking bike, very clean particularly since you removed the brake master cylinder and brake pedal???

[n16ht5]

Thanks, I took it off when I went to LHRB.

the pack is from Dirtbikegear.com. They are made in the USA and durable.

I made some buddy peg brackets and mounted yamaha R6 passenger pegs

and a LEXX MXe exhaust with Trail Saver 85db insert. It has three inserts, one 85db, 94db, and 98db. Really awesome pipe

went ridin.. at 6,000ft and above the jetting was getting a bit rich. I was at 48/168 so I dropped the main to 165 and went to 1.5 turns out from 3. seems about right now. I might drop the pilot to 45.

[Dirt Addict]

WHERE DID YOU GET THE RAD CUSH HUB? $$$?

WHERE DID YOU GET THE LARGER CLUTCH COVER? EVERY BIT HELPS...

Excellent build on this bike. I just picked up a low hour 07 that I want to build in to a light adv bike . Great photos and info. Thanks...

Edited July 31, 2012 by Dirt Addict

[MANIAC998]

And I thought I had a great location to ride in!!! Awesome pics n16ht5!!!

Maniac

[shrubitup]

Watch out on the Lexx. I had one on my YZ250F. It would vibrate and the cheesy strap ovaled out worse. IMO, not a long-term mounting solution unlike the nice Yamaha OEM cans. The 85dB insert sounds good but completely zaps power IMO.

I opted for a MotoWorks SR4 G2 which will fit the WRs too. Stout mounting solution there and spark arrested without having to service rivets on a OEM YZ-F pipe.