2009 250SX, handlebar clamp height?

Started by Revelyell, Feb 07 2012 01:30 PM
4 replies to this topic

  • Revelyell

Posted 07 February 2012 - 01:30 PM

#1


What is the stock height.

KTM sells 32mm 37mm 42mm...which is stock height?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed

  • tdrewk

Posted 07 February 2012 - 06:07 PM

#2

37mm is stock. If you need risers, Enduro Eng has a great kit

https://www.enduroen...01C9-1177528263

  • Revelyell

Posted 07 February 2012 - 06:33 PM

#3

Thanks for the info.

I bought the bike used, the bars had been changed out and I just did not know if the 37mm clamps were the stock ones or if 32mm were stock.

It is a lot easier setting something up if I know a baseline first.

  • tdrewk

Posted 07 February 2012 - 08:35 PM

#4

and FYI - the stock KTM bar is the Renthal 672 bar bend

  • Revelyell

Posted 11 February 2012 - 09:54 AM

#5

View Posttdrewk, on 07 February 2012 - 08:35 PM, said:

and FYI - the stock KTM bar is the Renthal 672 bar bend

Yup, I knew that and needed to know the clamp height to decide on what bars I will use.

I currently have 604 bars on it (99mm tall), i also have a set of CR-Mid (87mm) the 672 are about 80mm tall so I needed to know if I had stock clamps or the +5mm clamps.



  1. ThumperTalk
  2. → Dirt Bike
  3. → Make / Model Specific
  4. → KTM
  5. → KTM 2-Stroke
If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!