got the needles order.. NEDH, NEDJ, NECH, NECJ.. what needle should I start with??? the bike is a ktm 250 xc-w 2010 40 60 deg about 1500 feet above see level???? any idea's ??? thanks fore the help WORM WORM
needles part2
Started by ohiostate, Feb 05 2012 04:08 PM
10 replies to this topic
Posted 05 February 2012 - 04:08 PM
got the needles order.. NEDH, NEDJ, NECH, NECJ.. what needle should I start with??? the bike is a ktm 250 xc-w 2010 40 60 deg about 1500 feet above see level???? any idea's ??? thanks fore the help WORM WORM
Posted 09 February 2012 - 08:39 AM
Look on KTMTalk for some threads on this. It's already there, same folks as would reply here.
Posted 09 February 2012 - 11:21 AM
Read these
[size=3]
Here you go. There is a ton of stuff to read through on here.
http://ktmtalk.com/i...T&f=10&t=383316
http://ktmtalk.com/i...ST&f=6&t=438815[/size]
[size=3]
Here you go. There is a ton of stuff to read through on here.
http://ktmtalk.com/i...T&f=10&t=383316
http://ktmtalk.com/i...ST&f=6&t=438815[/size]
Posted 09 February 2012 - 01:30 PM
going to try the NEDJ, NEDW see how they work.. out the needles are on back order... thanks WORM WORM
Posted 09 February 2012 - 01:31 PM
Mvertoch..thats a lot of good information. Thanks
Op
For cold weather, here at about 700', I run a 38 pilot, 165 main, and second position stock needle @ 46:1. I think I am slightly rich..I might tweak my jetting some, but it sounds like Im alot closer than many. I also run a Pro Circuit Plat 2 pipe. The bike runs damn strong..just an occasional rich stumble when the air temp warms up. Im considering the head mod when I rebuild.
Op
For cold weather, here at about 700', I run a 38 pilot, 165 main, and second position stock needle @ 46:1. I think I am slightly rich..I might tweak my jetting some, but it sounds like Im alot closer than many. I also run a Pro Circuit Plat 2 pipe. The bike runs damn strong..just an occasional rich stumble when the air temp warms up. Im considering the head mod when I rebuild.
Posted 09 February 2012 - 02:15 PM
moto_rider7755, on 09 February 2012 - 01:31 PM, said:
Mvertoch..thats a lot of good information. Thanks
Op
For cold weather, here at about 700', I run a 38 pilot, 165 main, and second position stock needle @ 46:1. I think I am slightly rich..I might tweak my jetting some, but it sounds like Im alot closer than many. I also run a Pro Circuit Plat 2 pipe. The bike runs damn strong..just an occasional rich stumble when the air temp warms up. Im considering the head mod when I rebuild.
Op
For cold weather, here at about 700', I run a 38 pilot, 165 main, and second position stock needle @ 46:1. I think I am slightly rich..I might tweak my jetting some, but it sounds like Im alot closer than many. I also run a Pro Circuit Plat 2 pipe. The bike runs damn strong..just an occasional rich stumble when the air temp warms up. Im considering the head mod when I rebuild.
Moto
Thats good jetting, but try the needle in the 3rd position. That will lean it up a bit.
I run the same jetting as you in the spring and summer, but the needle in the 3rd position.
I run 40 pilot and 165 main or 162 depending upon how cold it is. I also have a modded head and run the Suzuki needle
NECJ Suzuki needle
Posted 10 February 2012 - 10:56 AM
NEDJ NEDW.. can I use one of these needles in the summer time?? it get hot in tenn in the summer time... 80--110 thanks WORM WORM
Posted 10 February 2012 - 02:54 PM
ohiostate, on 10 February 2012 - 10:56 AM, said:
NEDJ NEDW.. can I use one of these needles in the summer time?? it get hot in tenn in the summer time... 80--110 thanks WORM WORM
I use the NECJ all year round. You just have to go down on the pilot. I run a 40 in the winter and a 38 in the spring and summer. You may need to go down a bit more than me, based on your climate. I run a 165 main all year round also. You can use the #3 position on the needle as a starting point and go up or down from there. I have never used the NEDW or NEDJ. I dont want to get that involved in it, because my bike runs great with the NECJ. Read the links that I posted and see what other guys say. My head spins reading about all this stuff! lol








