Tried looking at the manual and couldn't find much . How much should I gap it and how can I get it out? Have to take the seat off?
Spark plug help
Started by Stealth13, Feb 01 2012 08:58 AM
3 replies to this topic
Posted 01 February 2012 - 08:58 AM
Tried looking at the manual and couldn't find much . How much should I gap it and how can I get it out? Have to take the seat off?
Posted 04 February 2012 - 03:54 AM
Yes, you will have to remove the seat and gas tank. And you'll need the special Yamaha tool to be able to reach down in the hole to get to that plug. Maniac
Posted 08 February 2012 - 10:31 AM
The special tool that I use is a piece of rubber hose, just slip it over the ceramic insulator and insert plug and turn to start threads, then pull off hose and tighten down. Just be sure that the plug is started straight. you should be able to turn it in and out 2 - 3 turns without wrench before you tighten it down and do not over tighten.
