twin air airfilter

1 reply to this topic
  • tomtom1

Posted January 19, 2012 - 12:27 PM


Hi all i decided to clean my twinair airfilter out on my wr450 03model,after cleaning it i came to refit, but the filter has a rubber bung in the hole of the filter, the bung has no hole in it so i cant see how the filter is held onto the cage,because the wire retainer has nowhere to locate if there was a hole in the bung the cage still woulndnt reach through the filter unless i take the plastic ring off the cage ive done a search but cant find the same problem, has anyone any ideas? tar

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • aussieklx

Posted January 19, 2012 - 03:21 PM


How was it when u removed the filter?

Does the cage still have the slotted extension for the spring retainer?


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.