FMF silencer issues...



1 reply to this topic
  • PK

Posted August 03, 2001 - 01:06 PM

#1

I just installed a FMF Q series pipe on my 99 YZ400 and I have noticed a few things and was wondering if anyone else has seen the same problems.
First off, I can't use the circular gasket between the header and silencer because the clearance is too tight. Tried teflon tape and hi temp RTV, both of them blew out, duh..
When I was washing my bike today, I noticed the silencer has a dent in it from my brake caliper when I bottomed the suspension. What the #$!@#$? I thought they would do some research on the fittment of this pipe before selling it to the public. I'm pissed...

Pat

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • #1_Hit-man

Posted August 03, 2001 - 03:48 PM

#2

Pat, Try chamber seal, its meant for exhaust headers. I used this for my 2-stroke where they all leak oil at the jug, with this it did not leak one drop of oil. You can buy it at the motorcycle shops around $6.00 - $7.00.

------------------
00'YZ426F 00'XR50R LATER DAYS!!!





Related Content

Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo
Supercross

Wilson the Blue Privateer by jetfuel


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  50 replies
Forums
Photo

05 yz450f not fast enough by RedeyeYZ


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  38 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.