WR426f FMF powerbomb/ti 4 jets?


No replies to this topic
  • 513rider

Posted January 16, 2012 - 06:20 PM

#1

I'm running an '01 WR426f with grey wire clipped, no airbox lid, an FMF powerbomb and an FMF titanium 4 can. It ran fine before as I was running a 4.1 powercore with the spark arrestor in it. With the new Ti can it's backfiring and fireballing a lot. The low end seems to be down too.

My question is what jets are people running to manage this? I know fmf makes a kit but it's like $75 or something and seems a bit much if I only need a pilot and a main.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.