easy pull clutch system

1 reply to this topic
  • mxcowboy

Posted July 30, 2001 - 04:53 PM


Moose has one on their site. It's a leverage box that goes between perch and cable and was wondering if anyone has tried this and how it works? thanks for your input.....

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • jbird

Posted July 31, 2001 - 03:14 AM


mxcowboy, I have run these on two previous bikes and they work really well. They have three settings you can try. The only thing I didn't like is the fact the effectivly make your clutch cable about 6 inches longer and could cause routing issues. The other is that they won't work with the stock YZ cable because the diameter of the cable itself is too thick. It won't fit into the housing of the easy clutch.
So anyway, if you have an aftermarket cable and don't mind the extra length give it a shot. It will make the pull easier and they don't cost very much either.

01 YZ426F, 99 YZ400F, 86 XR250, 76 RD400, 71
Heavily Modified Z50

Related Content


Need help by Goforaride

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  68 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Michigan Motocross Tires by 288yz450

Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply

Is the 2016 GYTR Yamaha YZ450F too fast? by Fryboy

Dirt Bike   Special Interest Forums   Pro Racing
  • * - - - -
  • Hot  241 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.