needed .45, or .46 fork springs, 5.0 shock spring

5 replies to this topic
  • dooweb2

Posted September 30, 2003 - 07:22 PM


I think these may have been on wr 400? does anyone know what bike these came stock on? thanks Jeff have 4.7 and 4.8 5.2 shock springs for sale or trade

  • dooweb2

Posted October 01, 2003 - 07:42 AM



  • jwriott

Posted October 01, 2003 - 08:00 AM


I'm pretty sure the .46's came on the WR426. I just took them out of mine and put .42's in to soften it up a bit.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • mikeolichney

Posted October 01, 2003 - 09:21 AM


I have the stock springs from a WR400 in my YZ250F. I believe they are 5.0 and 4.6. The shock is great but the fork springs are too stiff, I don't like how they feel and am going back to stock. I will sell you the fork springs.

I also need another 5.0 shock spring if anyone has one for sale.

  • dooweb2

Posted October 01, 2003 - 11:05 AM


v max and mike are you guys selling your springs? pm me also mike how much do you weigh and what do you ride?mx trails

  • mikeolichney

Posted October 01, 2003 - 12:29 PM


I weigh 190 w/o gear. The YZF is raced in enduros and is also a backup MX bike if my CRF needs maintenance. I will sell the .46 fork springs for $25 plus shipping. They just aren't plush at all.

I also have a WR250F that I trailride (it has plates). I am looking for a 5.0 shock spring for that. With race sag set at 98mm, I have NO free sag (should have 15 to 25mm).

Will pay $25 plus shipping for a 5.0 shock spring, I beleive they were stock on the YZ/WR 400s.


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.