Front Brake Line Q

3 replies to this topic

Posted December 16, 2011 - 10:55 PM


Can I take a 05-11 yz450f front brake line(cr style routing) and bolt it on my 02 yz426f?

  • grayracer513

Posted December 17, 2011 - 07:55 AM


The line will fit, but there is no place to clamp it to on the early fork guards, and the newer guards don't fit. Lightspeed used to make a set of white plastic late style guards for the '04 and earlier bikes, but I don't know if they still do.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • rr558

Posted December 17, 2011 - 08:04 AM


You can take the little black line clamp on the bottom of your existing forks and drill some holes in the fork leg protector and mount it that way (turn it sideways). I used safety wire also. It will run inside the fork tube like the Honda. I did this on all my 2000 and up yz's.


Posted December 17, 2011 - 09:44 PM


Thanks Guys!! :bonk::smirk:

Related Content


2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

James Stewart back on a YZ450F by YamaLink

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies

The "going back to the other darkside" adventure... by Monk

Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.