08 WR450 Winter Jetting

2 replies to this topic
  • Mefesto

Posted December 10, 2011 - 09:31 PM


First real post here at Thumper and I hope to be able to contribute to the forum here in the near future (once I up my bike knowledge). Great information here and I've already had several questions answered in the hunt for my main problem.

I purchased my 08 WR450 this fall from a good friend (who took really good care of it) with the intention of mating this bike with a Timbersled Mountain Horse snowbike kit. So far the installation and first ventures out in the snow have been great and I can't wait to really tear it up.

With that being said my main problem is my jetting. Currently the bike is setup for around 3,000ft and 65F. I've gone through the entire jetting database and I can't find anyone with my specific requirements. 6,000ft at 20F with medium to low humidity would be a pretty accurate description of where 80% of our riding takes place.

I would be grateful if anyone could help steer me in the right direction. My local dealership keeps telling me to check my manual. I have a manual and the chart isn't in there.

Thanks folks!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • BajaFool

Posted December 11, 2011 - 07:46 AM


You should ask your question on the Intake/Jetting/Fuel Injection Forum for a more in-depth answer.

  • Mefesto

Posted December 11, 2011 - 08:58 AM


Will do. Thanks so much!


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.