Just picked up an '02 WR426F


12 replies to this topic
  • PNW_XR

Posted November 20, 2011 - 03:44 PM

#1

I found it on Craigslist. The guy just lost his job, so he was selling stuff. I paid $1000. It starts right up, and seems to run really good. It has some issues, like the decompression cable is snapped, the plastics have seen better days, the rims have some wows in them, and the header has a dent. But, all in all, it seemed like a decent deal. It's got a steering damper, aftermarket exhaust, triples, and some other stuff. I'll take a pic and post it. I've been riding an '05 XR650L, but I wanted something a bit lighter for desert racing. I'm thinking this may just be the ticket.

Edit: I do have a question:

Is the decompression lever on the left side by the clutch? What is the small lever on the right side of the bars?

Edited by MountainBear, November 20, 2011 - 05:13 PM.


  • RasmusDK

Posted November 21, 2011 - 01:27 AM

#2

Sounds like a great deal . Wanna sell that steering damper :-P
Yea the one on the left is the decomp, dont know about the other one, hot start maybe.

  • mikewrf18

Posted November 21, 2011 - 07:16 AM

#3

Edit: I do have a question:

Is the decompression lever on the left side by the clutch? What is the small lever on the right side of the bars?



Sounds like he may have installed an aftermarket hot start lever. What does your carb look like? Do you still have the red knob (plunger style hot start) on your carb, or is there a cable running to it above the choke? (black knob)

  • Rot Box

Posted November 21, 2011 - 09:00 AM

#4

How did you start it without the de-comp lever? The reason I as is it is nearly impossible to kickstart them without it.... If it kickstarts fine it could be unhooked because they upgraded the cam-shaft(s) to eliminate the need for it... Which would be really nice.

  • mikewrf18

Posted November 21, 2011 - 09:02 AM

#5

How did you start it without the de-comp lever? The reason I as is it is nearly impossible to kickstart them without it.... If it kickstarts fine it could be unhooked because they upgraded the cam-shaft(s) to eliminate the need for it... Which would be really nice.

Good Catch! ^^^ May have installed an 03' or newer Exhaust cam for auto-decompression.

Here's a great thread on any questions you may have on auto-decompression for the 426.
http://www.thumperta...t=253090&page=2

  • PNW_XR

Posted November 21, 2011 - 05:54 PM

#6

Thanks for the replies, guys. The reason we were able to start it is because the guy I bought it from was mistaken about the decompression cable being broken. The hot start cable is broken. The decompression works just fine. He's obviously not really savvy about the stuff. I'm just learning about this bike. I'm going to clean it up, order new plastics, put some new grips on it (it looks like he sold the bark busters off of it), straighten out the rims, get the handlebars back to center, change the oil, check the valves, lube everything, and then ride it.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • PNW_XR

Posted November 23, 2011 - 03:50 PM

#7

Here she is:

Posted Image

  • PNW_XR

Posted November 23, 2011 - 03:53 PM

#8

I took her out for a tear this afternoon since I got off of work early, and she runs well. My only concern is there is an unusual rattling noise at idle down on the lower side of the case. There are no oil leaks, and the bike pulls real hard through all gears, with roll-on wheelies through the first few. Also, notice the bent front wheel. Somebody was playing find the boulder.

  • zokalr13

Posted November 26, 2011 - 12:09 PM

#9

i too sold my 07 xr650l for a 99 wr400- i like it a lot better in the dirt -its not as torquey in the motor dept but mine is stock so i will do up the motor..you got yours a grand cheaper than i did -cause i live in an expensive place called canada ....:lol:

  • ryanmxrdr

Posted November 26, 2011 - 07:41 PM

#10

you should look into putting a hot cam in with the auto decomp. Then that bike will start as easy as the newer ones do. We put one in my friends yz 426. he hated starting that thing till we put that auto decomp in. Now he loves it. Took about 30-45 mins to install. have fun with it

  • zokalr13

Posted November 26, 2011 - 10:10 PM

#11

have clean [fuel filter]fresh hi test fuel in tank [not ethanol]a new plug choke on do not turn throttlegrip starts easy ..i just started mine today after a month of sitting no prob what so ever.... :lol:

  • oldschool68enduro

Posted January 02, 2012 - 04:23 PM

#12

What cam did you put in I have an 01 426f I like the sound of auto decomp

  • 2grimjim

Posted January 02, 2012 - 04:29 PM

#13

Here she is:

Posted Image


Oh yeah, I remember the gawdawful tank on my '99 WR400.

It might be a worthwhile investment to get the IMS YZ fuel tank and a YZ seat. The WR's from '98-'02 had that horrible watermellon gas tank.

You wont lose any fuel capacity with the IMS YZ tank but you also wont walk like you spent three days on a swabacked horse after a long ride.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.