They were slightly (like 1mm) different. Just made the holes slightly bigger. Worked out great
Drz212cc build
Started by
dougtrip
, Nov 14 2011 07:11 AM
67 replies to this topic
Posted 06 December 2011 - 10:01 AM
decided to stay with what i have since i allready spent the money. maybe down the road i'll change. here's what i finally came up with. pretty much the same as everyone else.
Posted 20 December 2011 - 07:14 AM
well after trying to have one of the local machine shops bore the swingarm and getting a reply of 5-6 weeks, i decided to buy a boring head and bar set and do it myself. there were some other options that i had discussed with someon else but went this route. I also found that I had to change up my master cyl bracket to clear the hose.
Custom graphics on order and tear down for finish welding and paint.
Custom graphics on order and tear down for finish welding and paint.
Posted 20 December 2011 - 08:00 AM
Nice work, wish I had the tools to do that. Maybe someday. The machine shop by me is also really slow (actually, really busy so it takes a long time to get my stuff done). It would be nice if I could schedule it and drop it off a day or two before hand like the mechanic.
Posted 02 January 2012 - 08:44 AM
What kind of bars are those and are you using bar risers as well?
Thanks
Thanks
Posted 02 January 2012 - 08:35 PM
dougtrip said:
thanks smac! HERE ARE SOME PICS, BIKE IS FINALLY DONE!!!
10+ man! Great build!
Who did your graphics?
Posted 03 January 2012 - 07:14 AM
GilaMonster said:
What kind of bars are those and are you using bar risers as well?
Thanks
Thanks
crf150r tall, no riser
Posted 03 January 2012 - 07:16 AM
500XC said:
10+ man! Great build!
Who did your graphics?
Who did your graphics?
thanks! Tyler over at magiksc did them.
Posted 03 January 2012 - 05:55 PM
great looking build. Getting ready to build my daughters up, she is pretty excited after riding my wifes all summer.
Posted 05 January 2012 - 07:29 PM
I was looking at your gear shifter. I haven't seen on like that, or it just looks different from that angle from what I have seen. If you don't mind me askin, what did you do to come up with that?
Posted 06 January 2012 - 05:11 AM
it's the stock shifter. i cut it off and then bent it at the length that fit me and welded it back on aliminating that crappy linkage
