So, while I was installing my Rekluse EXP 2.0....


10 replies to this topic
  • johnny6speed

Posted September 27, 2011 - 12:27 PM

#1

Posted Image
Posted Image
Posted ImagePosted Image

I learned while doing my first clutch R&R on a dirtbike, not to use a BFTqW. :smashpc::banghead::thumbsup::banghead::busted:

  • zlathim

Posted September 27, 2011 - 12:34 PM

#2

Bummer.

If the shoulder bottomed and not the shank, it should come out fairly easily. If you have a left handed drill bit the right size, that would be a good place to start.

Good luck ( this is of course assuming that you haven't already extracted the broken piece, you never really said )

  • Wurtsmith Vet

Posted September 27, 2011 - 12:38 PM

#3

Very tough luck. Been there, done that. At least the easy part will be removing the remaining stud. Hard part may be finding a replacement bolt as most jobbers won't just sell you one, but having a few back-ups on hand is never a bad deal. Good rule of thumb that has served me well in the past is anything under 25HP- use 3/8" or smaller. Ford and tractor use- 1/2" and above. Of course, if you own a Honda- hammer and dull chisel will suffice for most overhauls! Old Sarge.

  • johnny6speed

Posted September 27, 2011 - 12:39 PM

#4

Nope its still in there. Dropping it off at my awesome local Yamaha dealer (Woody's in Topsham, Maine). Gonna let em handle it. I am too frustrated with my ignorance at the moment to attempt removal of it.

  • grayracer513

Posted September 27, 2011 - 12:44 PM

#5

Hard part may be finding a replacement bolt as most jobbers won't just sell you one, ...

Hmm?

The bolt is packaged as a single part: PN 90159-06010-00, $2.00 at retail.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Wurtsmith Vet

Posted September 27, 2011 - 12:55 PM

#6

Better Clutch than cylinder stud.

Edited by Wurtsmith Vet, September 27, 2011 - 12:57 PM.
Double post


  • swaldrop

Posted September 28, 2011 - 01:14 PM

#7

New clutch boss is like $50 right? Seems like it would be cheaper just to get a new one than paying a shop to do it.

  • grayracer513

Posted September 28, 2011 - 02:44 PM

#8

New clutch boss is like $50 right? Seems like it would be cheaper just to get a new one than paying a shop to do it.


Paying a shop to do what? That bolt will back straight out if you hit it with a left handed drill bit. The boss retails for $76, BTW.

  • johnny6speed

Posted September 28, 2011 - 05:54 PM

#9

Yes, I am paying my local Yamaha dealer to back the bolt out. I loaded the bike up and dropped it off instantly due to frustration per my own ignorance. It may be perceived as ignorance for not going to my local hardware store and purchasing a left handed drill bit but, I was upset and pissed off, so I decided to let them handle it.

  • DBMX 925

Posted October 01, 2011 - 05:40 AM

#10

Yes, I am paying my local Yamaha dealer to back the bolt out. I loaded the bike up and dropped it off instantly due to frustration per my own ignorance. It may be perceived as ignorance for not going to my local hardware store and purchasing a left handed drill bit but, I was upset and pissed off, so I decided to let them handle it.


AHHHHHH been there. Kinda like remodeling around the house.

  • johnny6speed

Posted October 01, 2011 - 01:11 PM

#11

There is a happy ending to this story. The dealer was kind enough to back it out for me for minimal charge. We all had a good laugh at my ignorance and they all made me feel better explaining it happens all the time etcetc. But, after speaking with the owner of the dealership for a few minutes about why I broke it and what I was installing it created a buzz around the dealership. North of Boston Jr, (Portland Maine) the off-road motorcycle scene is limited to a few moto-x tracks and ADV riders on KLR type bikes. So once I set my freeplay gain in the parking lot, I asked the owner permission to ride on the abused grass on the property. He of course obliged and asked if he could try my bike with the EXP 2.0. After only a few minutes, he drove it directly into the shop, and motioned me over, asking me if everyone could try it. Of course I was excited too and let the gents that wrench on these things try it. Everyone in the dealership took it for a spin, never hearing of this "Rekluse" auto clutch. Everyone came back with a smile. I kept listening to their comments "this must be awesome in the woods", "it's seemed to tame the bark down a bit".. Overall per usual at Woody's a great dealership experience.

On to the clutch. I rode in the rain for a few hours on my property and surrounding area. It's far easier to do grassy powerslides as I feel as if I have more control. Next I was doing the tightest figure 8's in my driveway I could do. I felt like I was on a giant blue trials bike. During this s*** weather we are having up here, I ventured out to the atv/snowmobile trail out back. ATM, its wet, snotty, mossy, rocks and mud. I felt comfortable standing up, leaning my head over the numberplate and just tractoring along in 2nd. There is a lot of mental improvement here for me I believe, not having to worry about fanning the clutch so the bike doesn't flameout has allowed me to focus more on other things. This bike has now really become exactly what I wanted. Though I understand that becoming more comfortable with the clutch lever to the point where it is muscle memory and I don't have to think about it, is an important skill to have, but, for a bit of engineering and a few hundred bucks, its worth the "cheating" factor.





Related Content

Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.