2010+ tuner port


8 replies to this topic
  • dalonar

Posted September 05, 2011 - 06:08 PM

#1

i'm looking for the female end to plug into the 2010 yz450f. anyone have any ideas?

  • geshields

Posted September 05, 2011 - 07:13 PM

#2

The tuner has the female end. The bike has the male end. Can you clarify the question?

  • dalonar

Posted September 05, 2011 - 07:32 PM

#3

i need the pigtail that would be part of the tuner without the $250 price tag. I'm running lights on the port and would like to have it easily removed instead of the setup i have now.

  • tech24

Posted September 06, 2011 - 06:17 AM

#4

that may be hard to find but I would just splice into the wire(s) you want and attach space teminals then you can plug and unplug as desired.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Toby259

Posted September 06, 2011 - 08:01 AM

#5

maybe you could buy that little plastic clip piece that is hooked to the frame, and use that to make a female plug...

  • brentn

Posted September 06, 2011 - 11:12 AM

#6

The plug is proprietary, will be hard to find something that fits but probably not impossible.
I burnt off the coating on the wires in one spot and soldered my connection right on for my light just before the harness plug and taped it up nice.

  • grayracer513

Posted September 06, 2011 - 11:28 AM

#7

If you visit a couple of auto electric specialty shops, you can probably find the connector among their harness repair parts. It's apt to be less proprietary than you might think.

  • dalonar

Posted September 06, 2011 - 05:55 PM

#8

If you visit a couple of auto electric specialty shops, you can probably find the connector among their harness repair parts. It's apt to be less proprietary than you might think.


i'm willing to bet you are right, i've done some looking at the local parts stores. We can get close but not 100% fitment. I'll keep looking and post my results! My whole goal is to get an enduro type kit put together that is easily removed.

  • todds924

Posted September 06, 2011 - 08:12 PM

#9

look at the electrical connectors from K&L Supply. They have lots of replacement connectors for the Japanese wiring harnesses.





Related Content

Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.