Adding headlight to my yz426f ?

1 reply to this topic
  • Thepowderblue

Posted August 29, 2011 - 03:09 PM


So I have a 02 yz426f and I want to know how I can make my bike put out 12volts so I can put a headlight on temporally for the dunes and just take the light off when I dont need it and have the wires there so when I need them. I need to know what I would need and have to do it or if there is a diy for the wiring part.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted August 29, 2011 - 05:33 PM


There are two ways of doing that:
  • Use a light powered only by a battery
  • Install a flywheel and stator from a WR426 and modify the stator to be compatible with the YZF ignition system

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.