Installing a YZ450 Cam in a WR450



2 replies to this topic
  • DYZFatCat

Posted September 11, 2003 - 12:56 PM

#1

Simple question for those of you who have done this. Is the YZ cam installed at the same timing mark as the WR cam? Or is it also advanced 1, like when you change a WR426 to YZ timing? I searched around the site but couldn't find a WR450 to YZ450 answer. Thanks in advance. Damon

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Junior_Vet

Posted September 11, 2003 - 03:49 PM

#2

Put the cam in according to the mark on the cam. The YZ cam mark is in a different position relative to the mark on the WR cam.

I did mine that way it was like day and night, (once I got my pipe opened up a bit). :)

  • crushedreams

Posted September 11, 2003 - 05:40 PM

#3

Ya what he said. look at the marks and they are one tooth off from each other. You will like the difference if you want more power take the battery off and pull the airbox lid.
Josh




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.