What Pipes fit the 1998 WR400


3 replies to this topic
  • AATA

Posted August 24, 2011 - 03:59 PM

#1

Can someone tell me what year pipes /models were the same. For example, will a different year YZF pipe fit on a 1998 WR400. I'm trying to find a stock muffler to make a bike quieter.

thanks!

  • clodeb

Posted August 27, 2011 - 05:55 AM

#2

I had the same problem with the bike i bought ,it came with a yosh full exhaust...way too noisy so i put back the stock steel cannister. I have read that you can put a stock yz 426 or maybe 450 can and it will fit.what is your jetting spec and is your idlle ok

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Birdy426

Posted August 28, 2011 - 07:09 AM

#3

YZ and WR from 98 thru 02 will bolt right up. A stock YZ pipe with a Pro Moto Billet Sparky end cap and quiet insert will give noticeable performance improvement with a nice, reasonably quiet exhaust tome and will be off road legal where spark arrestors are required.

Several slip ons for 03-06 (steel framed) 450s have been reported to either bolt on or fit with some minor mods (spacers, slotting a hole), but your best bet is if you find one to search here on TT to see what success folks have had. To get a more complete result, search fit on YZ400/426 as well as WR400/426.

  • Hurricane

Posted September 01, 2011 - 10:43 AM

#4

I put on a stock yzf exhaust from a 426 on my old 98 wr and could not believe the performance increase over the stock boat anchor. I would think the steel frame 450 exhausts would all fit but don't quote me on that (03 to 05).




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.