Anyone happen to have clutch plate specs for '03 WR450?


2 replies to this topic
  • bmonnig

Posted July 31, 2011 - 03:33 PM

#1

Long story short, I'm working on a buddy's WR450, and he doesn't have / didn't leave the service manual with me. I've got a couple domed clutch steels, and I'm wanting to measure the remaining steels and fiber plates to see where they fall in relation to the service limits.

Does anyone happen to have the service limit specs for these plates that they'd be willing to post up? If, by some miracle, I could come across this info in the next 2 or so hours, it would be GREAT! I know, I know...beggars, choosers, and all that. :smirk:

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Captn Kirk

Posted August 02, 2011 - 07:21 AM

#2

I am working on a friend's '05 wr450 - his clutch as well. The manual for his calls for 0.115 - 0.121 for the friction plate.

Why are you working on his clutch - what are his symptoms? Reason for the question is I am not finding anything here on the forums doing thread searches that talk about a clutch that disengages, but won't slip. I ride a KTM and the clutch is fabulous. I rode his WR once and realized that he has a clutch that is either engaged or disengaged - no in between. Don't mean to hijack, but thought it might be the same issue on your end?

  • byggd

Posted August 02, 2011 - 12:07 PM

#3

Grab yourself a free manual!

http://www.yamahaown...ook.com.au/?r=0




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.