Question on Jay Marmont map


7 replies to this topic
  • jcm3

Posted July 25, 2011 - 03:32 PM

#1

Getting ready to pick up an 11, and had a question about the map. I haven't bought or used the tuner yet, so sorry if this question doesn't make sense or is obvious to those that have.

Race Map (Jay Marmont)
TP FI
4/4 -1 +3 -2
1/2 +3 +4 -3
1/4 -2 -3 -2
TP IG
4/4 +2 +2 +2
1/2 +2 +4 +2
1/4 +2 +4 +4
Very aggressive map. Also suits the DRD pipe also.


I ass-u-me that I can disregard the TP settings, and just enter the numbers? I believe the increments are 1/8/ 3/8 and 6/8 for the tuner, not 1/4, 1/2 and 4/4. I assume that I just enter the numbers and don't worry about converting the numbers to the correct ratios?

Can't wait to get and ride the new bike!

  • Quernix

Posted July 26, 2011 - 03:33 AM

#2

I assume that I just enter the numbers and don't worry about converting the numbers to the correct ratios?


Correct!

  • jcm3

Posted July 26, 2011 - 06:43 AM

#3

Correct!


Thank you!

  • SEOINAGE

Posted July 26, 2011 - 09:38 AM

#4

from what I hear the marmont map was made for use with the stock exhaust, anyone with aftermarket exhaust richened the FI up? I am debating doing this on the high revs and full throttle and maybe half throttle.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tech24

Posted July 26, 2011 - 09:46 AM

#5

from what I hear the marmont map was made for use with the stock exhaust, anyone with aftermarket exhaust richened the FI up? I am debating doing this on the high revs and full throttle and maybe half throttle.


The notes in the sticky says it suits DRD pipe well. Adding exaust doesn't require additional fuel as it does sometimes with a carbed bike. I have been running mostly woods map and slapped on a Q4 with SA in and it made the woods map feel like a race map. Had to change it to broad powerband map. I'd have to look again to see what the fuel trims are on those maps, I forget.

  • HRC

Posted July 26, 2011 - 10:48 AM

#6

I am currently riding with the Marmont map with aftermarket exhaust and haven't changed a thing on the map. Works great !

  • steve_97060

Posted July 26, 2011 - 09:00 PM

#7

have a DRD pipe and DT1 air filter system and the Marmont map is the map of choice for me also...

  • SEOINAGE

Posted July 27, 2011 - 04:21 AM

#8

I was going to take the liberty of testing out a couple minor changes, but then it was raining when I got off work.





Related Content

Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

YZ450F 03 Sparks driving me crazy by SirAttard


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.