motorrad fail safe thermostat replacement


2 replies to this topic
  • mauiwarren

Posted July 08, 2011 - 11:39 AM

#1

I am about to replace my stock T-Stat with the Fail Safe one.. p/n 7203-180
where do I drill the weep/pin holes?
Thanks ..
Warren from Hawaii.......

  • Agent2

Posted July 08, 2011 - 09:01 PM

#2

When you pull out the stocker, you will see.
Substitute weep hole for jiggle valve -
Posted Image

  • mauiwarren

Posted July 09, 2011 - 05:44 AM

#3

Thanks for taking the time to help........

Great bikes.. great people on this site

Warren





Related Content

Forums
Photo

what is the cheapest usd conversion for a 650l by xrRider LasCruces


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  59 replies
Forums
Photo

Is this rod shot? 87 xr600r refresh by goneballistic


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  136 replies
Forums
Photo

poor man's xr650l: any reason not to put an xr650l motor into an xr600 frame? by goneballistic


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  43 replies
Wiki
Complete Guide To Installing FCR MX on a XR600 - last post by jtf1307tie

Complete Guide To Installing FCR MX on a XR600


Wiki Articles
  • 2 replies
Forums
Photo

&%$#@!ing XR650R manual ... by carlgustav


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 10 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.