Low footpegs on 2010/ 11 yzf? (non protaper)


10 replies to this topic
  • Quernix

Posted June 30, 2011 - 11:14 AM

#1

Is there a solution other than the pro taper pegs to lower the footpegs on the 2010/11 fs out there, yet?
Do the STR brackets of the -09 models fit?

  • Anssi

Posted June 30, 2011 - 11:21 AM

#2

Fastway footpegs in the lowboy position:
http://www.promotobi...Path/23_100_113

  • Quernix

Posted June 30, 2011 - 11:24 AM

#3

Unfortunately they don't list the lowboy brackets for the 2010/11 models. Can I use the OEM brackets for the lowboy position?

  • Anssi

Posted June 30, 2011 - 01:42 PM

#4

I'm 99% sure that they will mount in the Lowboy position using the stock brackets. I will check this weekend (my dad has a pair on his 2010 YZ450F).

  • norcal_hoss

Posted June 30, 2011 - 03:52 PM

#5

I have the fastway low boy pegs on my 2011 and they came off my 2010 they definitely fit.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • ccie2be

Posted June 30, 2011 - 05:59 PM

#6

I just got an 11. You can cut the barrel off the bottom of the stock footpeg and move it to the top and it will lower it down and back about 1/2 In.

  • Troutman

Posted June 30, 2011 - 07:35 PM

#7

I just got an 11. You can cut the barrel off the bottom of the stock footpeg and move it to the top and it will lower it down and back about 1/2 In.


+2, Cut the stockers and put the barrel on the bottom it works and its free. The stock pegs on the 2010-12 are nice and wide so you don't get any advantage of buying an aftermarket wider lower peg, just a lighter wallet :thumbsup:

  • Quernix

Posted July 02, 2011 - 01:08 AM

#8

The stock pegs hit a stop on the bracket. Just cutting off the barrel would not work. One had to turn the brackets as well...don't think this will work.
The fastway pegs have an adjustable stop, do tehy?

Posted Image

  • eazrider

Posted July 02, 2011 - 07:28 AM

#9

Switched my brackets left to right on my '10, may have had to grind something or other (can't remember, it's been a year now) the result was positioning the pegs slightly farther back, and lower, works for me....

  • Troutman

Posted July 03, 2011 - 10:22 AM

#10

The stock pegs hit a stop on the bracket. Just cutting off the barrel would not work. One had to turn the brackets as well...don't think this will work.
The fastway pegs have an adjustable stop, do tehy?

Posted Image



It works, but you might have to grind the stop like said above. My buddy did it and it worked great I will ask him what he had to do.

  • ccie2be

Posted July 06, 2011 - 04:59 PM

#11

yep,i checked the bracket and it'll work. Looks the same as the older ones.





Related Content

Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Forums
Photo

2016 YZ450 by CaptainKnobby


Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.