YZ450F brake light switch routing

No replies to this topic
  • chrispa

Posted June 20, 2011 - 03:43 PM


hey guys,

just wondering those of you with a YZ450F with rear brake light fitted, where do you run your brake light switch cabling from the rear brake lever?

I've run mine like this:

try this link if that doesn't work:

I then wedge the cable between the guard bolt and the airbox, so its away from the exhaust (cable follows the airbox grove down).

I find this a little annoying as the guard does not fit 100% flush onto the bike. I think of any other way to route the cable though, the bottom of the air box is completely sealed.

Any ideas?

Related Content


YZ450F 03 Sparks driving me crazy by SirAttard

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

Is it worth it? (Cam and High compression piston) by macgi77

Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

Chubby dad, looking at bikes , First trip to the orange/black forum ! by Slow_ride

Dirt Bike   Make / Model Specific   KTM   250-530 EXC/MXC/SXC/XC-W/XCR-W (4-Strokes)
  • Hot  28 replies
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info

  • 0 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.