Question about yamabond?

3 replies to this topic
  • powers450f

Posted June 19, 2011 - 01:42 PM


Was checking my valves on my bike and a little piece of yamabond fell down into the motor.... It can't do any damage correct? A guy told me it could cause damage... Which I think is WRONG. Its just going to get caught in the oil filter.. Correct?

  • RiderX

Posted June 19, 2011 - 02:12 PM


Could block oil passages.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted June 19, 2011 - 02:21 PM


If you're talking about a small bead of the silicon-like Yama-bond, it shouldn't be an issue. It's generally too soft to hurt anything it might get fed through, and will more than likely get hung up on the oil strainer in the sump.

  • powers450f

Posted June 19, 2011 - 04:00 PM


Ok, thanks for the re- assurance Gray.

Related Content


Is the 2016 GYTR Yamaha YZ450F too fast? by Fryboy

Dirt Bike   Special Interest Forums   Pro Racing
  • * - - - -
  • Hot  241 replies

First Hare scramble tips by dhend8

Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies

Thinking about Yamaha 250... by Arctic Pride

Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies

2016 YZ450 by CaptainKnobby

Dirt Bike   Dirt Bike Technical Forums   Suspension
  • Hot  59 replies

YZ450F 03 Sparks driving me crazy by SirAttard

Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 5 replies

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.