YZ clutch compatibilty


10 replies to this topic
  • primerib108

Posted June 06, 2011 - 05:24 AM

#1

Found a 2003 Wiseco performance clutch kit for a good price....will it fit in my 2006? I found most internet part suppliers don't have the best descriptions.

  • grayracer513

Posted June 06, 2011 - 08:09 AM

#2

Between the two models you listed, the plates are the same, but the springs are different. This is more than likely a matter of spring rate rather than operating length, since the clutch boss, pressure plate and plate set are the same, so the springs should work, but may not have the right "feel" (they could be heavy and hard to pull).

  • primerib108

Posted June 06, 2011 - 10:34 AM

#3

Thank you sir. I suppose I could buy new springs for my year of bike if the 03's are too stiff......they pretty cheap and easy to find.

  • primerib108

Posted June 11, 2011 - 06:27 AM

#4

I went with a gytr clutch basket instead......price was too good to pass up and I have never been steered wrong by gytr yet. Made by Hinson from what I hear but I could be wrong.

Now, what clutch kit....I am thinking stock yamaha. I beat the crap out my clutch btw so anyone have a suggestion?

  • Family Man

Posted June 11, 2011 - 03:04 PM

#5

aftermarket HD springs.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted June 12, 2011 - 08:37 AM

#6

I went with a gytr clutch basket instead......price was too good to pass up and I have never been steered wrong by gytr yet. Made by Hinson from what I hear but I could be wrong.

Now, what clutch kit....I am thinking stock yamaha. I beat the crap out my clutch btw so anyone have a suggestion?


OEM, Hinson, or GYT-R. Springs from the same sources.

  • primerib108

Posted June 13, 2011 - 03:09 PM

#7

I went with the GYTR kit....it was actually cheaper than oem go figure.

  • mxtanner

Posted June 14, 2011 - 05:26 PM

#8

will a yz250f clutch interchange with the 2008 450?

  • grayracer513

Posted June 15, 2011 - 09:51 AM

#9

You're kidding, right?

  • mxtanner

Posted June 15, 2011 - 11:00 AM

#10

no, im not.. i haven't pulled the clutches out of my 450 yet, but i have a complete Hinson clutch setup from a 250f and was just wondering.

thanks for the sarcasm

  • grayracer513

Posted June 15, 2011 - 02:53 PM

#11

thanks for the sarcasm

Any time. Hold one of your 250F plates up next to your 450's clutch cover. The two clutches are not even close to the same.





Related Content

Forums
Photo

The "going back to the other darkside" adventure... by Monk


Dirt Bike   Make / Model Specific   KTM   250/350/450/505 SX-F & XC-F (4-Strokes)
  • Hot  113 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.