Blue Plates



21 replies to this topic
  • dirtdad

Posted May 23, 2001 - 06:33 AM

#21

So, what are you saying? I think we all were in agreeance here (including toxic) that a synthetic was acceptable and even desirable to run in our bikes. Were you just re-iterating that point or did you read something in any of these replys to the contrary? I will add though that I'm no engineer so I will still follow the manual when it states to avoid oils with friction modifiers. As enmerdeur pointed out, alot of the lower viscosity oils (synthetics included) have these additives. Of course I have no statistical data or scientific facts to back this up. I can only go with what I read on the bottle.

------------------
00 YZ426F
01 TT-R125L (my son's)
91 CR125
83 YZ490
74 Hodaka Super Combat(gone but not forgotten!)

[This message has been edited by dirtdad (edited 05-23-2001).]

[This message has been edited by dirtdad (edited 05-23-2001).]

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • YZmann

Posted May 23, 2001 - 07:36 AM

#22

Quickest reference I had on file:
http://msproul.rutge...its/mobil1.html

I'm saying if you want to use 10W40 energy conserving), do so.

Addendum:

Mobil 1 Tri-Synthetic 5W-30 Zinc(ppm)=1070 Phosphorus(ppm)=892
Amsoil (motorcycle approved for wet clutches) zinc=1270 and Phosphorus(ppm)=1150
http://www.amsoil.com/literature.htm
read document G391; compare specs of different oils.

[This message has been edited by YZmann (edited 05-23-2001).]





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.