Best replacement chain n sprokets for the pig



6 replies to this topic
  • Redtractor

Posted August 25, 2003 - 03:59 AM

#1

Who makes the best replacement chain and sprokets for the BRP?? Something that holds up to the pigs power!! Thanks John

  • AZ Thumpdaddy

Posted August 25, 2003 - 04:36 AM

#2

Redtractor,
I put the DID 520VM X-ring on my pig with a riveted or staked masterlink. The only thing slightly stronger is the DID 520ERV but not worth the bucks. The best sprocket is the Ironman and worth the money. There was a thread about three months ago on this - do a search and find it as it helped me with my decision. Be prepared to spend about $200 for the chain and sprockets plus another $75 for the chain tools. You can get the chain from www.rockymountainmc.com or www.whitebuffaloracing.com and the sprocket www.dirttricks.com (new home for Ironman). I replaced mine at about 3,600 miles. :)

  • Redtractor

Posted August 25, 2003 - 05:12 AM

#3

Thanks for the info I had heard about the ironman sprockets just ordered a set. I alreay have the chain tools!! This sounds dumb but all the chains come with the clip type master link how do you get a staked or rivit type link. I normaly deal with rocky mountain. thanks again for your help John :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • billyboy11b

Posted August 25, 2003 - 06:19 AM

#4

Can you run a clip type master link on the 650R? I run one on my 650L, and haven't spread one yet, should I take note? I don't think that I make -quite- as much HP or torque as you 650R guys.

  • FooBarr

Posted August 25, 2003 - 02:10 PM

#5

Got the IronMan sprockets/chain combo with master link. Haven't had any issues but my motor is internally stock with only carb, exhaust upgrades. Consider myself an itermediate rider.

  • TommyA

Posted August 25, 2003 - 03:58 PM

#6

If you're wanting Ironman sprockets, call Matt at Qualitysmart.com as he is an authorized dealer and can save you a few bucks. I just got my rear Ironman from him a couple weeks ago. Great customer service! :)

  • AZ Thumpdaddy

Posted August 25, 2003 - 07:46 PM

#7

John,
I bought the staked link at the local Honda dealer (or any dealer) who stocks DID chains and links. I bought the ERV link ($7) because that is all they had in stock (also stronger). The VM link is $5. It took me 2 trys to get the staking process down as I cracked my first one - too much muscle! DID and Honda recommend staking for continuous link chains. :)
T-Poppa





Related Content

Reviews

Honda XR650L 2016 by Chris.GVS


Honda XR650L 2016
  • - - - - -
  • 0 reviews
Forums
Photo

DirttyPig 2005 Xr650l Prroject! by braapmebb1moretime


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • 22 replies
Forums
Photo

ignitech programmable XR650L CDI by brianhare


Dirt Bike   Make / Model Specific   Honda   XR600/650
  • Hot  60 replies
Forums
Photo
Supercross

Supercross Preview 2017 Part 1: Championship Contenders by Chris Cooksey


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  148 replies
Reviews

Honda XR650L 2017 by Chris.GVS


Honda XR650L 2017
  • - - - - -
  • 0 reviews
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.