Pix of Pipe Fixer-Upper



5 replies to this topic
  • Guest_Guest_*

Posted May 13, 2001 - 12:52 PM

#1

I have posted the pix of the Header Fixer
They are under the Bent Header thread but I will put them here also.
http://content.commu...1&ID_Message=38
http://content.commu...1&ID_Message=39
http://content.commu...1&ID_Message=40
http://content.commu...1&ID_Message=41
pretty self explanatory but any quest......just check out the thread on BENT HEADER or feel free to email me
G4

------------------
NOPE..........BOY.......
That's not thunder ridin' your BUTT .........
It's a whole Damn HURRICANE!!!!!!

  • thebray

Posted May 21, 2001 - 04:52 PM

#2

how much air pressure did you use.

  • motoman393

Posted May 21, 2001 - 05:05 PM

#3

I used anywhere from 60-80 PSI! I used 80 PSI at first to get the major crease out...then at the end when it was almost out I used 60 PSI! Oh yeah, 1 thing I learned is you have to use acetiline (propane will not work)! Hope this helps!

Garrett

------------------
I get my kicks on a 2001' YZ426!
Friendswood, TX

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • yzernie

Posted May 21, 2001 - 06:31 PM

#4

Were does or when should the Mountain Dew come into the fix??

  • Guest_Guest_*

Posted May 21, 2001 - 07:05 PM

#5

That MD has about 50% JD and it is to drink just b4 the proctologist uses those gloves next to it!

  • Guest_Guest_*

Posted May 21, 2001 - 07:06 PM

#6

you don't want to know what the shovel is for!





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.