Jetting help??


1 reply to this topic
  • moon55

Posted May 05, 2011 - 08:11 PM

#1

I've got a 2001 YZ426f which I recently installed new piston and rings along with new valves, guides, seals, etc. I also had a blueprint port job done to the head. Now when riding, I am fouling a plug every ride. The carb has the stock jets. My spark plug is black and sooty when I check the condition. Any suggestions on how to adjust my jetting? It seems to bog a little at 1/4 throttle. I know my Pilot jet is #42. Is it running rich and should I go down one size on the pilot jet?

Any suggestions would be greatly appreciated.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted May 05, 2011 - 08:21 PM

#2

Black and sooty can be caused by weak ignition, too. Check your stator and coil.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.