low voltage help plz

No replies to this topic
  • shelbyguy

Posted April 24, 2011 - 05:55 PM


so after doing this "mod" to run blinkers, tail, brake lights and a battery


ive come to a question.

on my bike 02 wr426

the voltage regulator ran to the headlight (yellow and black) the blue wire was not there.
i plan on running the same yellow and black wire back to the bridge rectifier and then a + and - to the battery..

my question is this..the black wire from the VR and the bolt through the VR to the frame share continuity (ground) can the rectifier, and the battery also share this same lead to ground, or will the ac and the dc lines need dedicated grounds?

this is the nte rectifier
Posted Image

Posted Image


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.