KX65 sag setting?

5 replies to this topic
  • 702inda509

Posted April 22, 2011 - 09:53 PM


Looking through the threads for a sag setting for a kx 65 to no avail. So my Question is does someone know what about it should be? Generally I've heard your sag should be 1/4 your total suspention. How do you measure the total suspension(with or w/o shock)? This bike has stock suspension w/o a lowering kit or anything. Thx in advance:worthy:

  • Racer47

Posted April 23, 2011 - 02:28 PM


Set it to 2 1/2 to 3 inches of sag with the rider. Measure from the back of the swing arm (or use the axle bolt head) up to the fender. I usually put a piece of tape on the fender and draw a line on it.

First pick up the rear to top out the suspension, measure that distance. The have the rider sit in a neutral position and measure again. The difference should be 2 1/2 to 3 inches.

pm me your email address and i'll send you some more info.

  • Dr.Crankenstien

Posted April 24, 2011 - 06:28 AM


65mm for the KX65 Do not forget to check static sag when you are done

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • 702inda509

Posted April 27, 2011 - 08:06 PM


btw what should the static sag be 10 to 15mm?

  • JJRace

Posted April 30, 2011 - 07:19 AM


80mm is what we set them up to.


  • cbass722

Posted April 15, 2016 - 09:32 AM


What is static sag

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.