'99 WR400/YZF400 forks


4 replies to this topic
  • skinz750

Posted April 19, 2011 - 08:35 AM

#1

Hi,

Does anybody out there know whether the forks from a '99 WR400 will fit straight onto the same year YZF400?

Trying to find YZF forks here in the UK is proving difficult, however WR ones not so much.

Many thanks for any help.

Edited by skinz750, April 19, 2011 - 09:09 AM.


  • MaxPower

Posted April 19, 2011 - 08:48 PM

#2

[COLOR="Green"]I believe they will bolt right up.Spring rates may be different [/COLOR]

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • skinz750

Posted April 19, 2011 - 11:54 PM

#3

Nice one, thanks.

I have the old forks, the upper stanchion on one is damaged, so if i just swap the springs over to the WR forks i've got a set of YZF forks?

  • Birdy426

Posted April 20, 2011 - 12:06 AM

#4

I believe the damping is a bit different as well...check the P/Ns on the internal parts to verify. Worst case is just swap the uppers and Bob's your Uncle.

  • skinz750

Posted April 20, 2011 - 08:53 AM

#5

Cheers for the info guys. Much appreciated.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.