Will these triple clamps fit my WR450F?


3 replies to this topic
  • g123

Posted April 09, 2011 - 03:47 PM

#1

It's an 06 WR450F and the Pro Taper triple clamps say they fit a 2005 YZ450F so it should fit? I would be using the OEM bottom clamps.

Triple clamps:
http://cgi.ebay.com/...e=STRK:MEWAX:IT

Did the YZ have a different offset or fork diameter than the WR that year?

Thanks for the help!
Glen

  • 2grimjim

Posted April 09, 2011 - 04:07 PM

#2

Yes, they should fit. Starting in '05 all YZ's and WR's went to 48mm forks. the offset should be the same for the YZ and WR in those years. Check out Scotts website for more info.

http://www.scottsper...e=4&Bike=Yamaha

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • bg10459

Posted April 10, 2011 - 04:47 AM

#3

The spacing between the fork legs may have changed between 05-06, but since the WR is the 06 and it usually lags one year behind the YZ, it may work. I'm not really sure, but it's something to consider.

  • Just_a_trail_rider

Posted April 11, 2011 - 07:44 AM

#4

The spacing between the fork legs may have changed between 05-06, but since the WR is the 06 and it usually lags one year behind the YZ, it may work. I'm not really sure, but it's something to consider.



The spacing did not change from 05 to 06. It changed on the 07 and up yz's I think.

These clamps will fit.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.