03 wr450 odo seal for flatlandracing spacer
Posted April 01, 2011 - 10:01 AM
can some one help?
Posted April 01, 2011 - 10:48 AM
Posted April 01, 2011 - 10:56 AM
Posted April 01, 2011 - 11:09 AM
I actually just hauled the old seal out and cleaned it up and its in great shape so I'll be able to re-use it. However I was at the dealer this morning and they only show the entire odo assembly and not a seperate seal. I'll have to check online to see if the microfiche for later years has the seal seperate just in case down the road.
A good way to confirm that would be to check Flatland's site to see if your unit is the same as the one used by the 06+ WR's. If so, then buy the seal for the 06+ bikes. They are sold separately - that was the route I took after munching my seal trying to remove it from the odo drive.