How much oil



4 replies to this topic
  • Pogley

Posted August 02, 2003 - 04:34 PM

#1

My friend just bought a used 2000 wr400. He did not get a shop manual with it but will soon. he is in the process of changing the oil and is uncertain of how much to add. Thanks

  • The_Blue_One

Posted August 02, 2003 - 04:54 PM

#2

I think a complete oil change is 1.8 liters.Without changing the filter it's 1.6.

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • tctrailrider

Posted August 03, 2003 - 03:26 AM

#3

My 426 is 1.5 qts..

  • Sylvain

Posted August 03, 2003 - 03:33 AM

#4

The 426 wr 2002 requires 1.5 L with filter change, and 1.3 if you don't change the filter. The general specs in my shop manual refers to the 400 as well.

If you really want to make sure, put 1.3 L after an oil change and check the level, act accordingly afterward.
You should add .2 L if you are below the mark.

Don't overfill.

  • MOmilkman

Posted August 03, 2003 - 04:57 AM

#5

Go to eBay and get him a manuel. If theres not one now, you will find one soon if you keep checking.

They are a dime a dozen over there. :)

BTW: On my 99, I just put 1.6 quts in with or without a filter change. Keeps it simple.




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.