AIRBOX MOD



1 reply to this topic
  • gagourd

Posted July 31, 2003 - 02:29 PM

#1

HOW WILL THE AIR BOX MOD AFFECT THE BIKE DURING WATER CROSSINGS? DO I REMOVE JUST THE REAR PIECE OR THE ENTIRE AIRBOX LID? WILL THIS REQUIRE RE-JETTING THE CARB? :)

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • Indy_WR450

Posted July 31, 2003 - 05:53 PM

#2

for water crossings run the upper 2 carb vent hoses to your air box. Seal your air box side cover with silicone. put glad wrap on your panel so the rubber sticks to your air box only. When dry remove the cover and peel off the glad wrap. As far as the snorkel or internal top cover you can remove it without jetting changes. Jetting changes may be needed if you get a lot of popping on decel. :)




 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.