Hone size Help


2 replies to this topic
  • fordrocks150

Posted February 27, 2011 - 09:53 PM

#1

Im looking to by a flex hone tool... does anyone know what size and grit i need to get for a 2009 yz450f? they also sell one for nikasil application would this be better also
thanks

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • fordrocks150

Posted February 27, 2011 - 10:06 PM

#2

so i found that 95mm seems to be the right size for the stock bore. but still dont know what grit to use.

  • grayracer513

Posted February 28, 2011 - 07:52 AM

#3

If you buy a Brush Research hone, the necessary oversize for the correct spring pressure on the abrasive balls is built in. Order the hone by the bore size, or 95mm, as you said.

Use 240 or 320, and avoid anything harder than aluminum oxide. Use the hone "wet":

http://www.thumperta...759#post4380759





Related Content

Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

Snake pit oct 30th by The Anvil


Dirt Bike   Dirt Bike Regional Discussion   California
  • Hot  293 replies
Forums
Photo
Motocross

Thinking about Yamaha 250... by Arctic Pride


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  491 replies
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Wiki
WR Camshaft Swap Info - last post by jamesm113

WR Camshaft Swap Info


Articles
  • 0 replies
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.