help broke case


6 replies to this topic
  • stub08

Posted February 26, 2011 - 07:37 PM

#1

well first raace was today and 15 min in to practice chain broke and rubed a hole in the case what can i do

  • brentn

Posted February 26, 2011 - 11:04 PM

#2

If the hole is small enough, JB weld will work.

If you can, post a pic of the hole, we can tell you if it is repairable or not, and possibly give you more info on how to go about fixing it.

  • Smokeslider

Posted February 27, 2011 - 12:57 PM

#3

What bike?

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • stub08

Posted February 27, 2011 - 05:54 PM

#4

its a 01 yz426 and i found a guy local that can tig weld it while on the bike:banana:

  • grayracer513

Posted February 27, 2011 - 06:23 PM

#5

If the hole in the case pumps out oil under pressure with the engine running, you have to be careful in repairing it, because that means it's broken into the oil feed to the trans shafts, and you don't want to close that off.

  • stub08

Posted February 27, 2011 - 07:40 PM

#6

its rite where the cluch cable is. it in rhe part where the rod that the cable hooks too you know where its round its rite ther in front of the sprocket

  • grayracer513

Posted February 27, 2011 - 09:15 PM

#7

That's the area where the passageway is. If it's not done right, there will be trouble.





Related Content

 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.