YZ426F 2001 carb problem!


7 replies to this topic
  • MxStyleZ

Posted February 21, 2011 - 12:38 AM

#1

Hey guy i got a YZ426F 2001 and i ran into a problem with the carb, it is leaking from the fitting that does a 360 the fitting that you plug your tank ose to, just wondering if that thing has a seal or some sort of washer that i could replace so it stop leaking from where it connect to the carb.

Here is a pic of the fitting
Posted Image

  • grayracer513

Posted February 21, 2011 - 07:46 AM

#2

The fitting has 3 O-rings on it that seal it to the body (#63 below). The PN is 3TJ-14564-40-00. The fitting is anchored by a screw under the fitting at about 4:00 o'clock in your picture (#62 below).

Posted Image

  • MxStyleZ

Posted February 21, 2011 - 11:38 AM

#3

My carb isnt quite like this one tbh thats probly the one they started using in 2003 on the 450s mine is almostg like that but not exactly so you sure i still have the O ring? maybe my micro fiche is just not as complet as your?

http://fiche.worldof...e=13&A=274&B=13

  • MxStyleZ

Posted February 21, 2011 - 12:46 PM

#4

Thx dude i definitivly have o-ring there too thx also for the part number!

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • grayracer513

Posted February 21, 2011 - 02:13 PM

#5

The carb in the illustration is an '06 YZ450 because the parts book for the 426 never called out those O-rings as a serviceable part. They are the same, however.

  • MxStyleZ

Posted February 21, 2011 - 02:49 PM

#6

The carb in the illustration is an '06 YZ450 because the parts book for the 426 never called out those O-rings as a serviceable part. They are the same, however.


Great man ill tell that to the guy at my yamaha store they didnt even knew it was servicable they told me it was pressed in lol.

  • grayracer513

Posted February 21, 2011 - 04:07 PM

#7

Great man ill tell that to the guy at my yamaha store they didnt even knew it was servicable they told me it was pressed in lol.

Did you tell them you thought that the ability to swivel a pressed in fitting was a pretty cool feature?

Just give them the PN, or order them from TT OEM and don't worry about the guy behind the counter.

  • MxStyleZ

Posted February 22, 2011 - 11:08 AM

#8

did you tell them you thought that the ability to swivel a pressed in fitting was a pretty cool feature?

Just give them the pn, or order them from tt oem and don't worry about the guy behind the counter.


lololol





Related Content

Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
Forums
Photo

First Hare scramble tips by dhend8


Dirt Bike   General Dirt Bike Forums   General Dirt Bike Discussion
  • Hot  33 replies
Forums
Photo

James Stewart back on a YZ450F by YamaLink


Dirt Bike   Special Interest Forums   Pro Racing
  • Hot  47 replies
Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Reviews

Yamaha YZ450F 2017 by Chris.GVS


Yamaha YZ450F 2017
  • - - - - -
  • 0 reviews
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.