Lets see the before and after (pics only please)... any make any model.
Posted 19 February 2011 - 04:25 AM
I just got into doing complete rebuilds and did one last winter and this winter. I plan on making this a hobby and doing one rebuild a year.
Here is the first one. 00' Yz 125 I bought for $400 with a seized crank, top end was destroyed and the bike had more rust on it than a car thats sat at the junk yard for 10 years, and the suspension was the same.
My second was a 96' Yz 250 that was shoved in the back of a garage, missing parts, most bearings on the bike had never been greased let alone changed. Top end was on its last leg and out of spec. and most seals on the bike were dry rotted.
Still need tires and a graphics kit but she's 100% mechanically sound and super tight.
Posted 19 February 2011 - 06:32 AM
Posted 19 February 2011 - 07:55 AM
Posted 19 February 2011 - 05:52 PM
it can hold itself up now! haha
very nice bike!
Posted 19 February 2011 - 08:01 PM
rust, chaind was too long, bald tires, needed new top end (after that the bottom end seized and broke the rod plus the new top end took a dump at the same time), bent handbars, every bolt was loose ( and i mean every single one), pretty much needed everything. Started from the gorund up starting with bare frame and powdercoating and went from there. new plastic, gripps, air filter, jug, bottom end, top end, chopped muffler, seat cover, plastic, graphics....pretty much everything. the bike is a TEN now.
Posted 19 February 2011 - 09:16 PM
Posted 19 February 2011 - 09:20 PM
Heres another 2000 yz125. Piston melted and then was rebulit
Posted 19 February 2011 - 09:24 PM
Posted 19 February 2011 - 09:29 PM
The next day, messing with some extra plastics the previous owner gave me.
Wasn't happy with it. So here she is now.
Posted 19 February 2011 - 09:40 PM
It may look nice but the engine was trashed on the inside and every bearing and seal was JUNK.
Here is is after. Top and bottom end, tranny needed a countershaft, clutch basket is new, swing arm and linkage bearings replaced, some new plastic, exhaust is fmf now, chain and sprockets, bars, bark busters, seat, kick starter replaced, rear brake pedal replaced, clutch perch, grips, and lots of other little things.
Posted 19 February 2011 - 10:51 PM
two weeks later
Edited by drz=fun, 20 February 2011 - 11:20 AM.
Posted 20 February 2011 - 09:17 AM
two weeks later
more pics pls!!!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users