carb slide 06 YZ450

3 replies to this topic
  • primerib108

Posted February 18, 2011 - 09:42 AM


Are these known to be on the "loose" side of things as in it makes a slight rattle sound with the filter off and engine running?

  • grayracer513

Posted February 18, 2011 - 10:09 AM



Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • primerib108

Posted February 18, 2011 - 10:23 AM



I had an old Wr400 that had the carb slide crack and a couple small pieces when through the engine......wasn't sure if I was heading down the same road.

  • grayracer513

Posted February 18, 2011 - 11:21 AM


You can see the kind of wear that results in cracking and breaking the vacuum release plates as it develops if you pull the carb and take a look at the slide from the engine side.

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.