Float Bowl Fumble

No replies to this topic
  • jbird

Posted April 04, 2001 - 04:14 AM


Well, here's the deal. I dropped my float bowl and broke the brass overflow tube from the bowl. I thought about partially drilling out the old tube from the inside of the bowl,finding a piece of brass tubing the same diameter, pressing it in, and epoxying, etc.
Yamaha does not sell just the float bowl but it looks like http://www.carbparts.com does.
Before I contacted them though I thought I would check and see if anybody else has made this mistake and what they did about it?
Also, to see if anyone had a float bowl for a 99 YZ400F kicking around that they may want to part with?
Thanks in advance-- Jon

99 YZ400F, 86 XR250
76 RD400, 71 Z50

Related Content


Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.