yz400f or wr400f???


8 replies to this topic
  • chrisleika

Posted February 12, 2011 - 12:29 PM

#1

Can i with engine or frame codes somehow find out what modeli have- yz or wr??? Previous owner said one thing, but reading obout specifications is another thing... Maybe anybody can help me???

Thanks

  • Badassyz400f

Posted February 15, 2011 - 03:25 PM

#2

If I'm not mistaken, the wr has a kickstand! Someone may correct me though!

  • Badassyz400f

Posted February 15, 2011 - 06:40 PM

#3

The wr also has a headlight and taillight! I'm 99% positive on my two responses! Hope I helped!

  • spdnjoe

Posted February 15, 2011 - 08:56 PM

#4

post some pics

Visit the ThumperTalk Store for the lowest prices on motorcycle / ATV parts and accessories - Guaranteed
  • chrisleika

Posted February 16, 2011 - 12:04 PM

#5

I have headlights, and all wireing for taillights and turn indicators... Also the rim is the
18", like on wr specifications, but in papers the bike is YZ400F...

Is there headlight for yz models???
There is my Yamaha:


  • Badassyz400f

Posted February 16, 2011 - 02:45 PM

#6

The yz has no lights, nor a charging system! I'd say u have a wr, the yz, I believe, is a straight up motocross bike, it shouldn't even have a reserve on the fuel tank!

  • primerib108

Posted February 16, 2011 - 03:36 PM

#7

I'd say a Wr400....I had one too and I striped it down to a YZ spec. Check the pigtail clip below the right side of the gas tank, if it has a 3 wires and one of them is grey.....it is a WR.

If you somehow determine it is a WR then clip the grey wire and tape it off to give YZ mapping along with retarding one tooth on the exhaust cam to give it some zing! The time mark on the cam should be at the 1 oclock position.

Also, a sure sign of a WR spec is mushy suspension if it was bone stock.

  • chrisleika

Posted February 17, 2011 - 05:54 AM

#8

ok thanks or the help, when i will be home, i will check for the grey wire....

Once i tried to retard one tooth on exhaust cam, but after that bike didnt start with kickstarter, so i place cam on stock position...

  • chrisleika

Posted February 18, 2011 - 09:14 AM

#9

Using frame and motor code yamaha dealer said that is wr400f....
Thanks for the help guys...





Related Content

Forums
Photo

Is it worth it? (Cam and High compression piston) by macgi77


Dirt Bike   Make / Model Specific   Honda   CRF 150/230 F/L
  • Hot  36 replies
Forums
Photo

100 hrs on 2014 yz450f, shim valves or replace them? by ttr230rider6


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • Hot  79 replies
Forums
Photo

yz250x vs 450 4t comparisons (preferably desert riding) needed by JakeNorthrupYZ450F


Dirt Bike   Make / Model Specific   Yamaha   Yamaha 2-Stroke
  • 9 replies
Forums
Photo

Megabomb Fitment by 288yz450


Dirt Bike   Make / Model Specific   Yamaha   YZ 400/426/450
  • 1 reply
Forums
Photo

Michigan Motocross Tires by 288yz450


Dirt Bike   Dirt Bike Regional Discussion   North
  • 1 reply
 
x

Join Our Community!

Even if you don't want to post, registered members get access to tools that make finding & following the good stuff easier.

If you enjoyed reading about "" here in the ThumperTalk archive, you'll LOVE our community. Come join ThumperTalk today!

The views and opinions expressed on this page are strictly those of the author, and have not been reviewed or approved by ThumperTalk.